Need help?Do you have a question about the Gliderol Glidermatic GTS+ and is the answer not in the manual?
Step-by-step process for coding a transmitter using the main unit's controls.
Method to code a transmitter by using an existing programmed transmitter.
How to assign functions to transmitter buttons for single or three-button operation.
Procedure to remove all previously learned transmitter codes from the unit.
Setting the top and bottom travel limits for the door using the main unit.
Resetting door travel limits using an existing transmitter.
Adjusting the motor's force sensitivity for opening and closing the door.
Configuring the delay before the door automatically closes after opening.
How to control the unit's LED using the transmitter's STOP button.
Locking out transmitter signals to prevent operation.
Information about the key ring transmitter and battery replacement.
Identification of connectors and components on the EAS receiver board.
Steps to code a GHI transmitter to the unit.
Procedure to erase all GHI transmitter codes.
Details the warranty duration for different Gliderol door and operator types.
Outlines general limitations, exceptions, and conditions for the product warranty.
General| Manufacturer | Gliderol |
|---|---|
| Model | Glidermatic GTS+ |
| Type | Garage Door Opener |
| Motor Voltage | 24V DC |
| Max Door Weight | 100kg |
| Remote Control | Yes |
| Remote Control Frequency | 433.92 MHz |
| Remote Control Buttons | 3 |
| Operating Voltage | 240V AC |
| Safety Features | Obstruction Detection |
To Next Page
