12
6. SYSTEM CONNECTIONS
The connection between the control unit and the base of the
hydraulic power lift is made up of a sheathing which contains:
1 flexible oil-pressure tube (lift movements).
1 compressed air tube for controlling the opening of the arms;
ATTENTION
In order to avoid functional damage, REPLACE the air-tight
"transport" cap with the "working" cap (aerated) after having
positioned the control unit and before using the lift. The working cap
is found within a nylon bag inside the mobile control unit
COMPRESSED-
AIR SUPPLY
SAFETY
RELEASE
OIL PRESSURE
SUPPLY
LIFT BASE
CONTROL
UNIT
To Next Page
Loading...
