8
3. PACKAGING
The specific components which make up the Quick Pull hydraulic power lift
are packaged as follows:
Component Packaging type
a) Hydraulic power lift wooden pallet
Kg 650
b) Control unit wooden crate
Kg 50
c) Various accessories cardboard box
Kg 350
When opening of the packages is recommended to check that the declared
parts correspond to the actual contents of the packages and that the
merchandise has not suffered damage during transport. Since the purchaser
is responsible for the merchandise during transit, save for different
agreements stipulated upon purchase, these inspections should be
performed in the presence of the courier. The manufacturer shall not answer
to any claims for damages suffered during transport, loading, unloading
and/or improper unpacking.
4. HANDLING
Handling of the consignment must be performed in compliance with the
current safety regulations by personnel who has experience with mechanical
load handling. Said personnel must be equipped with suitable protective
clothing. The manual handling of the package containing the hydraulic power
lift itself is expressly forbidden. The hydraulic power is packaged separately
from its electro-hydraulic control unit and its accessories. The relative
connections to these components must be performed during installation.
Important: Loading and unloading operations must be performed using a
forklift truck or other lifting devices of suitable capacity, with reference being
made to the package weights listed in the technical characteristics table. The
hydraulic power lift must be handled with a forklift truck or a bridge crane of
suitable capacity when moving it from the means of transport to its place of
installation.
To Next Page
Loading...
