4
1. GENERAL CHARACTERISTICS
The Quick Pull is a hydraulic power lift with a scissor-like structure which has
been designed and built to guarantee load bearing stability during both
raising and lowering operations.
The raising and lowering movements are carried out by a pair of single-
action hydraulic jacks which are controlled by an electro-hydraulic control
system. The hydraulic lift has reduced encumbrance dimensions and allows
for the work operations to be performed at a suitable height.
This manual is
supplied together with the machine, is to be considered an integral part of
the machine itself and must always remain with the machine, even in the
case of sale to a third party: The manual must be preserved in a safe place
in proximity to the hydraulic lift’s place of installation and use.
The manufacturer reserves the right to make any changes to the lift
described in this manual without prior notice, save for the observance of any
eventual prior agreements with the purchaser.
1.1. Identification data
Manufacturer: GLOBALJIG INTERNATIONAL s.r.l.
Via Aurelia Ovest Km 383
54100 Massa – Italy
Model: QUICK PULL
Type: Hydraulic power lift for motor vehicles – max capacity 2500 Kg
Machine data label:
To Next Page
Loading...
