Password for simple
command and PC utility
Example 1, set the password to be “VICTORY” and enable simple command
The command is “GSS,011412000010789,3,1,OU=VICTORY,A5=1*7e!”
Example 2, cancel the password of TR-206.
The command is “GSS,011412000010789,3,1,OU=*5b!”
Example 3, ping TR-206 and set the tolerance time of GPS fix as 3 minutes. The
password is 520JX
The command is “520JX,PI=180”
Example 4, switch TR-206 to motion mode and set the moving report interval as 30
seconds and static report interval as 30 minutes. The password is 7777.
The command is “7777,MM=30,MS=1800”
Example 6, make TR-206 link to server. And there is no password.
The command is “LI”
Example 7, switch TR-206 to standby mode. And there is no password.
The command is “SP”
To Next Page
Loading...
