Glow-worm Climapro2RF - Programming Hot Water Heating

0020094585_01-08/10-Glow-worm
- 14 -
HOWTOUSEYOURCLIMAPRO
2
RF
• Press tohighlightyourchoice
(activateordeactivate)andpressthe
button
toconrm.
6.8.4 Programming hot water heating
Factorysetting:
Monday to Friday
Nº of time
slot
Start Fin Activate
1 00:00 06:30 OFF
2 06:30 22:00 ON
3 22:00 00:00 OFF
Saturday
Nº of time
slot
Start Fin Activate
1 00:00 07:00 OFF
2 07:00 22:00 ON
3 22:00 00:00 OFF
Sunday
Nº of time
slot
Start Fin Activate
1 00:00 07:00 OFF
2 07:00 22:00 ON
3 22:00 00:00 OFF
• Press >thenselect>hot water>
program>dene>selectadayonthe
screen
Tosetanoperatingtimeslot:
Programmingforadaybeginsat00:00witha
maximumof7timeintervalsover24hours.
• Activateordesactivatewaterheating
withthe
buttonsandvalidatewith
button
.
• Denetheendofthetimeintervalwith
the
buttonsandvalidatewiththe
button.
• Begintheprogrammingoperations
againifyouwishtoaddothertime
intervals.
Tomodifyasetting:
• Usethebuttons
(goback)or
(goforward)tohighlightthe
settinginquestion.
• Changethewaterheatingsettingor
atimebypressing
buttonsand
validatewiththe
button.
Todeleteatimeinterval:
Deletionisperformed:
- timeintervalbytimeinterval,
- fromthelasttimeintervaltotherst.
• Usethebutton
tohighlightthe
lasttimeintervalthatwasset.
• Usethebutton
todisplay .
Thedisplayautomaticallygoesto

anddeletestheprogrammedsetting.
Thesettingfortheprevioustimeinterval
thenappliesupto
.
• Validatewiththebutton
or
deleteanothertimeinterval.
Todeleteanothertimeinterval:
• Usethebutton
tohighlightthe
previoustimeintervalandperformthe
actionagain.
Copy a day
Thisfunctionallowsyoutocopya
programfromonedaytootherdays.
Thisallowstheselecteddaytobecopied:
- toadayoftheweek
- toweekdays(MondaytoFriday)