Glow-worm Climapro2RF - Setting the Current Time; Choose Language for Menus; Control Name

0020094585_01-08/10-Glow-worm
- 22 -
HOWTOUSEYOURCLIMAPRO
2
RF
6.11.2 Setting the current time
• Pressthe
buttonandselect>
parameters>timeonthescreen
• Setthetimebypressing and
pressingthebutton toconrm.
6.11.3 Choose the language for the
menus
• Pressthe
buttonandselect>
parameters>languageonthescreen
Todisplaytheadditionallanguages:
• Select>othersonthescreen
• Choosethelanguagewiththebutton
andpressthebutton to
conrm.
6.11.4 Control name
• Pressthe
buttonandselect>
parameters>control nameonthe
screen
• Selecteachcharacterofthedevice’s
namebypressing
andthen
pressingthebutton toconrm.
The installation may be
composed of several room
thermostats. In such a case, a
number corresponding to the
area is assigned by the control
unit to each thermostat. The
number «1» is assigned to the
main area (example: LOUNGE
1).
Displayonmainscreen:
If enabled