Safety 1
0020300878_00 Energy
7
Operating instructions 5
1.3.5 Risk of death due to
explosive and flammable
materials
▶ Do not use the product in
storage rooms that contain
explosive or flammable sub-
stances (such as petrol, pa-
per or paint).
1.3.6 Risk of death due to lack
of safety devices
A lack of safety devices (e.g.
expansion relief valve, expan-
sion vessel) can lead to poten-
tially fatal scalding and other in-
juries, e.g. due to explosions.
▶ Ask a competent person
to explain how the safety
devices work and where they
are located.
1.3.7 Risk of death due to
changes
to the product or the
product environment
▶ Never remove, bridge or
block the safety devices.
▶ Do not tamper with any of the
safety devices.
▶ Do not damage or remove
any tamper-proof seals on
components.
▶ Do not make any changes:
– The product itself
– to the gas, supply air, water
and electricity supply lines
– to the entire flue system
– to the entire condensate
discharge system
– to the expansion relief valve
– to the drain pipework
– to constructional condi-
tions that may affect the
operational reliability of the
product
1.3.8 Risk of injury and
material damage due to
maintenance and repairs
carried out incorrectly or
not carried out at all
▶ Never attempt to carry out
maintenance work or repairs
on your product yourself.
▶ Faults and damage should
be immediately rectified by a
competent person.
▶ Adhere to the maintenance
intervals specified.
1.3.9 Risk of
corrosion damage due to
unsuitable combustion
and room air
Sprays, solvents, chlorinated
cleaning agents, paint, adhes-
ives, ammonia compounds,
dust or similar substances may
lead to corrosion on the product
and in the air/flue pipe.
▶
Ensure that the combustion
air supply is always free of
fluorine, chlorine, sulphur,
dust, etc.
To Next Page
Loading...
Need help?
General
