Need help?Do you have a question about the Glow-worm Energy7 Series and is the answer not in the manual?
General| Brand | Glow-worm |
|---|---|
| Model | Energy7 Series |
| Category | Boiler |
| Fuel Type | Natural Gas |
| Efficiency Rating | A |
| Mounting | Wall Mounted |
| Warranty | 7 years |
| Heat Exchanger | Aluminium |
| Type | Combi |
| Flue Options | Horizontal or Vertical |
Classification of warnings based on danger severity using symbols and signal words.
Defines the product's intended purpose and restrictions on usage, including user capabilities.
Provides essential safety precautions and guidelines for safe operation and installation.
Specifies that installation, inspection, and repair must be performed by competent persons.
Highlights risks associated with incorrect operation, including personal danger and material damage.
Outlines immediate actions to take if gas is detected in the building.
Provides instructions for responding to suspected flue gas leaks.
Warns against storing explosive or flammable substances near the product.
Emphasizes the danger of tampering with or bypassing safety devices.
Prohibits modifications to the product or its safety devices.
Stresses the importance of correct maintenance and repair by qualified personnel.
Warns about corrosive substances in the air affecting the product.
Guidelines for enclosing the product within a cabinet, requiring compliance with design instructions.
Advises on preventing frost damage to the heating installation during cold periods.
Requirement to follow all operating instructions for system components.
Recommendation to keep the manual and related documents for future reference.
Specifies the product article numbers to which these instructions apply.
Indicates compliance with basic requirements of applicable directives as stated in the declaration of conformity.
Information on the Benchmark Scheme for quality installation, commissioning, and servicing.
Details the information found on the product's data plate and its meaning.
Illustrates the product's components and their functions.
Identifies and describes the main control elements on the product's interface.
Explains the symbols and information shown on the product's display screen.
Details the functions of each button on the operator control panel.
Describes the two user access levels: end user and installer.
Step-by-step guide for initial product startup and opening essential valves.
Explains the information presented on the display during normal operation.
Instructions for monthly checks of the heating system pressure and adding water if needed.
Procedure for filling the heating system, emphasizing the use of suitable water.
Guide on how to select and change the product's operating mode.
Instructions for adjusting the domestic hot water temperature.
Procedure for setting the desired heating flow temperature.
Details on adjusting various product settings, dependent on the selected operating mode.
How to activate or deactivate standby mode and its implications.
Guidance on performing self-checks and contacting a competent person for fault resolution.
Information on interpreting fault codes and when to seek professional assistance.
Emphasizes the necessity of annual inspections by a competent person for product longevity.
Instructions for cleaning the product casing using appropriate methods and materials.
Guidance on regularly checking the condensate system for blockages.
Steps for temporary shutdown, including safety precautions against frost.
Procedure for permanent product deactivation, requiring a competent person.
Information on how to obtain details about the manufacturer's guarantee.
Contact information for the customer service department.
Lists adjustable parameters for heating and hot water modes with their ranges.
Provides a table of common faults, their causes, and recommended measures for resolution.
To Next Page
