0020085232_01 - 03/10 - Saunier Duval0020085232_01 - 03/10 - Protherm0020085232_01 - 03/10 - Hermann0020085232_01 - 03/10 - Glow-worm0020085232_01 - 03/10 - Bulex0020085232_01 - 03/10 - AWB
- 12 -
COMMENT UTILISER VOTRE APPAREILCÓMO UTILIZAR SU APARATOCOME USARE L’APPARECCHIOHOW TO USE YOUR APPLIANCEHOW TO USE YOUR APPLIANCEAKO POUŽÍVAŤ ZARIADENIECOME USARE L’APPARECCHIOHOW TO OPERATE YOUR APPLIANCECOMMENT UTILISER VOTRE APPAREILUW APPARAAT GEBRUIKEN
GEBRAUCHSANLEITUNG FÜR IHR GERÄT
UW APPARAAT GEBRUIKEN
• Press simultaneously on the buttons
and of mode to activate or
deactivate the preheat function.
- If
is displayed,
the preheat is deactivated.
- If
is not displayed, the preheat is
activated.
If a Glow-worm intelligent controls
are tted, then the timed period for
preheat can be changed, but only if it is
activated.
• Press the buttons
or of the
function to adjust the temperature of
the water in the heating circuit.
min. 10
recommended 50
max. Pre-set by the installer
If a Glow-worm outdoor sensor or
Glow-worm intelligent controls are tted,
the temperature of the water in the heating
circuit is calculated by the boiler. It is
neither necessary nor possible to adjust it
manually.
In this section fault codes that are
displayed, which CAN be carried out by
the USER to restore appliance operation
(Corrective action: ...). Other fault codes
MUST be solved by a competent person
only.
i
Like all condensing boilers
it will produce a plume of
condensation from the ue
terminal in cool weather.
This is due to the high
efciency and hence low ue
gas temperature of the boiler.
It is normal and not a fault
indication.
• If after carrying out this basic advice
and your appliance still does not work,
leave it turned off and contact your
competent person.
To Next Page
Loading...
Need help?
General
