Osicus User Guide V8 09/09/2021 Page 13 of 46
5. Installation
5.1 Osicus Program Installation
This installation manual is for use during the installation of Osicus. It will guide you
through installing the Osicus and connecting the audiometer for use with the Osicus
software.
Along with this manual you will find the following items in the box:
• A sound module
• A set of headphones
• A response switch
• A USB cable
• A USB memory stick containing software
• Osicus User Guide
• Laminated Short Form User Guide
There are three parts to the installation and they should be performed in the order noted
below:-
1) Load the audiometer software
2) Install the drivers for the USB
3) Connect the audiometer to the computer using the USB Cable
Insert the USB memory stick into the USB port on the computer, then open Windows
Explorer, and navigate to the USB drive.
There you will find 4 folders, named
Osicus Installation Files
Osicus 2 Drivers
Dotnetfx
Manuals
NB Do not connect Osicus to the PC until all program software and USB driver software
installation has been completed.
Software (Windows 10 and earlier)
Open the folder Osicus Installation and click on setup.exe. Installation will begin unless
the following problems are advised.
If your PC does not have the Microsoft .NET framework and/or Windows Installer 3.1
present, the installation will not take place and a message on screen will advise of this.
To rectify the problem, return to the USB memory stick, open the folder Dotnetfx and
click on setup.exe to install the missing programs.
To Next Page
Loading...
Need help?
General