Gmate Mini - Step 3: Insert New Lancet; Step 4: Remove Lancet Cap; Step 5: Replace Lancing Device Cap; Step 6: Cock the Lancing Device

14
Obtaining Blood Drop
STEP 3
While holding the lancet carrier, insert a new
sterile lancet into the bottom of lancet carrier.
STEP 4
Twist the cap of the lancet off.
STEP 5
Put the cap of the lancing device back on
and turn it clockwise.
STEP 6
Hold the tip firmly in one hand then pull out
the sliding barrel with the other hand. This
will cock the lancing device.