15
Obtaining Blood Drop
STEP 7
Set the proper depth of penetration by
rotating the cap of lancing device. 1-2 for soft
or thin skin, 3 for average skin, 4-5 for thick
or calloused skin.
STEP 8
Place the lancing device in place. Hold the
lancing device firmly against the side of the
finger, with the cap resting on the finger.
(The harder it is pressed the deeper the
puncture). Press the release button to take a
sample.
Caution : To reduce the chance of infection :
Make sure to wash the puncture site with soap and water
before sampling.
Do not share a lancet or a lancing device with anyone.
Always use a new lancet - lancets are for single use only.
Keep your meter and lancing device clean.
To Next Page
Loading...
