Need help?Do you have a question about the GMS B36 and is the answer not in the manual?
Identifies and illustrates the main physical components of the bending machine.
Explains the proper methods for positioning rebar for bending.
Illustrates common errors in rebar placement and their consequences.
Specifies the mandatory personal protective equipment (PPE) for operators.
Advises on appropriate clothing to prevent entanglement or injury.
Explains the thermal setting and the function of the motor protection switch.
Details the procedure for setting the machine to perform 45-degree bends.
Explains how to set the machine for 90-degree angle bends using the protractor.
Describes the process for setting the machine to achieve 180-degree hook bends.
Outlines the steps and programming for performing stirrup bending.
To Next Page
General