➢ No other parts should be mounted to the machine other than the ones manufactured by Göçmaksan
company.
➢ No bending should be made on the machine with bending apparatus which are deformed, cracked or
have an increased hole diameter.
➢ No wrong bending should be made on the machine. (Figure 5a-5b-6a-6b-6c-6d)
➢ Machine should be cleaned by air.
€ In cases when electricity board cap should be opened, the cap mustn't be opened without cutting the
power of the machine from the main switch.
➢ Irons to be bent should be fixed on the machine correctly. Fixing with retainer bending sleeve and
pins (Figure: 4a-4b-4c-4d).
8. SCOPE OF THE WARRANTY
Manufacturer acknowledges warranty and liability provided that complying with the following
conditions.
➢ Protectors found on the machine should be used.
➢ Warning signs should be taken into account.
➢ Machine shouldn't be operated without making grounding connection.
➢ Parts manufactured by Göçmaksan Company should be used in case it is required to replace a
broken part.
➢ Conditions indicated under the safety measures should be taken into account.
➢ Prohibited usage should be taken into account.
➢ Machine should be assembled in conformance with the assembly conditions.
➢ Machine should be handled in conformance with the handling conditions.
➢ Machine should be used by informed and authorized person.
➢ Measurements, dimensions and steel quality stated on the capacity plate should be taken into
account.
➢ Machine should be used in conformance with its manufacturing purpose.
➢ Electricity connection should be made by competent technicians.
➢ Machine shouldn't be used with any of the parts on it disassembled.
➢ Motor of the machine shouldn't be changed.
➢ Maintenance of the machine should be made in conformance with the maintenance conditions.
➢ No iron higher than the indicated size should be bent with retainer (maximum 16 mm)
➢ Correct bending should be made with the machine.
9. PROTECTORS TO BE USED WHEN WORKING WITH THE MACHINE
9.1. Protector apparel
➢ Helmet must be worn.
➢ Glasses must be worn.
➢ Boots with steel toe must be put on.
➢ Gloves must be worn.
To Next Page
Loading...