go-e Controller User Manual

1212 1313
8. Installation scheme
After completing the installation, please
note that the rmware of the go-e Charger
and go-e Controller should always be up to
date to ensure that they function as inten-
ded at all times. The rmware of both pro-
ducts can be updated, for example, via the
go-e app in the menu item "Internet".
RCD/FI
L2
L1
L2
L3
L1 L2 L3 N
0 6 5 1 0 1
L1
L2
L3
N
kWh
L1 L2 L3
N
Have the go-e Controller installed and congu-
red by a qualied electrician in accordance with
local installation standards.
An electrical installation distributor is recom-
mended as the place of installation. If there is
no more space, it is also possible to install the
go-e Controller in a new surface-mounted /
ush-mounted distributor next to it and to lay
the connection cables for voltage measurement
and current transformers there.

go-e Controller Specifications

General

Enclosure	Plastic
Communication Interface	WiFi
Protocols	Modbus
Output Voltage	230 V
Frequency	50 Hz
Protection	Overcurrent, Overvoltage