gpelectric.com | [page 27]
7.1 SERVICING PRECAUTIONS
1. DO NOT OPEN HOUSING. Contains no user-serviceable parts. Internal parts may be
electried, even with Inverter off and power disconnected.
2.
Maintain labels and nameplates on the Inverter. These carry important safety information.
If unreadable or missing, contact Go Power! for a replacement.
3.
Have your Inverter serviced by a qualied repair person using only identical replace-
ments. This will ensure that the safety of the Inverter is maintained.
4. Fuses must be replaced with fuses of the same type and rating only.
7.2 MAINTENANCE
Very little maintenance is required to keep your Inverter operating properly.
Keep the exterior of the Inverter clean and dry. Unplug the Inverter before cleaning. Periodically
clean the outside of the Inverter with a soft, dry cloth to prevent accumulation of dust and dirt;
never use water or water cleaners.
When cleaning the Inverter, conrm the screws on the DC input terminals are tight.
7. MAINTENANCE
To Next Page
Loading...
Need help?
General
