20
Settings
Time & Date
To set the clock and date:
• Press the <Directional Left/Right> buttons to move the cursor.
• Press the <Directional Up/Down> buttons to input values.
Device Standby
To enable / disable auto standby mode:
• Press the <Power> button to manually set the eReader to
standby mode.
• Press the <Power> button once to re-start the eReader from
standby mode.
Format Memory
This option will format internal memory and memory card. All
data will be lost. Please ensure that you backup your data before
performing this operation.
About Product
Displays the product information of the eReader.
Power Management
Displays the real time battery status of the eReader.
Restore Factory Defaults
You can restore the eReader’s settings to default but all DRM
contents and activations will be deleted.
Language
To set the system language of the eReader.
User’s Manual
Displays this manual in electronic format.
21
Battery Care Tips
IMPORTANT!
• Please charge your eReader for a minimum of 6 hours before
you use it for the first time.
• To ensure your battery operates optimally, PLEASE CHARGE
YOUR EREADER FOR A MINIMUM OF 6 HOURS BEFORE YOU
USE IT FOR THE FIRST TIME and always adjust the "device
standby" setting according to your needs or when your device
is not in use.
• To set device standby: Press the "Menu" button, choose the
"Settings" option, then select "Device standby".
• Choose your preferred time standby option.
• To view battery charging progress: Press the "Menu" button,
choose the "Settings" option, then select "Power
Management".
• Do not charge more than one device at a time via USB. This
could draw more power than USB ports can supply, limiting
how much your eReader can access.
• Do not operate your eReader while it is charging.
Troubleshooting
If the eReader does not function as it is expected, please try the
following steps.
The eReader is not responding or can’t be turned on.
• Reset the eReader by pressing and holding the power button
for 6 seconds. The eReader will be forced to shut down if it is
on and you are required to restart the eReader again.
• The battery has been fully depleted. Please charge the
eReader.
To Next Page
Loading...