Godex BP1000i Series User Manual

27
3 Printer Setting and Control
3.5 Error Alerts
In the event of a problem that prevents normal functioning of the printer, you will see an error message on LCD
screen and hear some beep signals. Please refer to below table for the error alerts.
Check ribbon
Operation Panel
Status
Type Beeps Description Solution
Print Head Error 2 x 4 beeps
The printing
mechanism is not
correctly closed.
Open the print
mechanism and
close it again.
Print Head Error None
High temperature
at the print head.
Once the print
head has cooled
down, the printer
switches to
standby mode.
No ribbon is
installed and the
printer displays an
error.
Make sure that
the printer is set to
direct thermal
printing mode.
The ribbon is
fini
shed or the
label supply hub is
not moving.
Replace the
ribbon roll.
Media Error 2 x 3 beeps
OPERATION TOUCH PANEL
FEED BUTTON
POWER BUTTON
/&'728&+3$1(/

Godex BP1000i Series Specifications

General

Brand	Godex
Model	BP1000i Series
Category	Label Maker
Language	English