39
5 Accessories5 Accessories
5.1 Preparation Steps
Before installing the optional modules, please make some preparations as follows.
1. Turn off the printer :
Remember to switch off the printer before installing any module.
2. Open the printer cover
**** Remember to switch off the printer before installing the cutter.
**** Do not use to cut adhesive labels! Glue residue will be left on the cutter blade and impair its functioning.
**** Under the ordinary paper application condition, the cutter performs 300000 cuts of a heavy paper with up
WRǍPWKLFNRUFXWVRIDSODVWLFVKHHWZLWKXSWRǍPWKLFN
Place the printer on a flat surface
and open the printer cove
To Next Page
Loading...
Need help?
General
