Godex BP1000i Series User Manual

51
6 Maintenance and Adjustment
6.7 Cutter settings
* Remember to switch off the printer before removing the CUTTER.
**The label medium should be at least 30 mm long to ensure correct functioning of the cutter.
1RWH
Switch off the printer before removing
the CUTTER.
(remove or install cutter refer to ‘’accessories’’ in Section 5)
Unscrew the screw at the
bottom of cutter .
Remove the cutter cover.
Clean and remove jammed paper.
Reinstall CUTTER back onto printer.

Godex BP1000i Series Specifications

General

Brand	Godex
Model	BP1000i Series
Category	Label Maker
Language	English