Wireless Flash Shooting: Radio (2.4G)
Transmission
Using a flash (master/slave) with a radio transmission wireless shooting function make it easy
to shoot with advanced wireless multiple flash lighting, in the same way as E-TTL II autoflash
shooting.
The basic relative position and operation range are as shown in the picture. You can then
perform wireless E-TTL II /ETTL autoflash shooting just by setting the master unit to <ETTL>.
Positioning and Operation Range (Example of wireless flash shooting)
● Autoflash Shooting with One Slave Unit
Wireless Multiple Flash Shooting
● Use the supplied mini stand to position the slave unit.
● Before shooting, perform a test flash and test shooting.
● The transmission distance might be shorter depending on the conditions such as
positioning of slave units, the surrounding environment and whether conditions.
To Next Page
Loading...
