9
SETTINGS AND FEATURES
The other settings are dedicated to the
features of the PH-1000. You can change
inputs (RCA 3 and XLR 2 are available
only on the PH-1000 LINE), swap the L-R
channels, turn ON/OFF the infrasonic filter,
and select the Mono or Stereo mode. You
can also adjust the brightness of the display.
When DISP is set to OFF, turn or press the
knob to temporarily activate it again.
PH-1000 LINE
Thanks to the Class-A built-in preamplier,
the PH-1000 LINE features a volume control
so you can use the knob to adjust the
volume.
Both the PH-1000 and the PH-1000 LINE can
be muted using the dedicated function. The
LINE model also displays the volume.
LR-Swap
ON/OFF
STEREO
S180°
MONO
M180°
MONO L
With headphones
MUTE
PHONES LO
PHONES HI
Volume setup
PREAMP
STAGE
MUTE
Input
RCA 1 (MC/MM)
RCA 2 (MC/MM)
RCA 3*
XLR 1 (MC only)
XLR 2*
*PH-1000 LINE only
Display
DISP
D50%
D25%
OFF
Input option
PHONO
LOAD (RCA 3/XLR 2)
LINE (RCA 3/XLR 2)*
*PH-1000 LINE only
Rumble
ON/OFF
Not for RCA 3 and
XLR 2
Volume
0-100
LINE
To Next Page
Loading...
