16
EN
DE
IT
| TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
Buzzing noise coming from
the loudspeakers.
| Try different placements
of the phono stage
and ensure that the
environment is not
affected by RFI/EMI.
Always use shielded
cables.
| The phono stage is
very sensitive to the
surrounding environment.
| The ground connector is
not connected correctly.
| Try to connect and
disconnect the cables and
ensure they are working
properly.
| The cables are not
connected properly.
| Always connect the
interconnect input to test
how the phono stage
performs.
| The listening volume is
very high while no music
is playing.
| High performance phono
stages will produce a
buzzing noise when the
volume is too high. It’s
normal when no music is
playing and with MC gain
selection.
| The tonearm and the
cartridge are not installed
properly.
| Check cartridge and the
tonearm.
To Next Page
Loading...
