17
There’s something wrong
with the sound.
| Any MC and MM
cartridge has specic
values that should be
set to achieve the best
performance.
| Refer to the
manufacturer’s
specications to set up
MC and MM cartridges.
PROBLEM CAUSE SOLUTION
PH-1000 is not working. | The interconnect cables
used on the input/output
are not shielded.
| Always use only shielded
cables.
If you have any questions contact us at: service@goldnote.it
| The power cord is not
plugged in.
| Connect the power cord
properly and ensure the
power outlet is working.
| The cables are not
connected to the
tonearm.
| Ensure that the cables are
properly connected.
| The IEC fuse is blown. | Replace it with one of the
same value.
CLEANING THE UNIT
With EXTREME care use ONLY water or detergents for delicate surfaces with a very soft
cloth to sweep dust and remove stains.
Any acid or not extremely soft cloth will irreversibly damage the unit. Do not use alcohol.
To Next Page
Loading...
