Golden Media Hypercube - System Setup; Language, A;V, and Network Settings

Ask before shutdown:
If this option is set to “Yes” a safety window will appear once the sleep timer is executed asking you if you really
want to turn off your STB.
Press the yellow Options-Button to toggle this option.
Once you have set all options to your liking press the OK-Button to save your settings.
A short note will tell you that the sleep timer has been activated.
11. Setup
11.1 Language
If no OSD menu is visible on your screen, press the Menu-Button
to open the main OSD menu. Navigate to the option “Setup” and
press the OK-Button to select.
1. Navigate to the option “System” and press the OK-Button.
• The “System” menu will open up.
2. Navigate to the option “Language…” and press the OK-Button.
• The “Language” menu will open up
Select your desired language with the Navigation-Buttons up and
down. Press the OK-Button to activate.
11.2 A/V Settings
If no OSD menu is visible on your screen, press the Menu-Button
to open the main OSD menu. Navigate to the option “Setup” and
press the OK-Button to select.
1. Navigate to the option “System” and press the OK-Button.
• The “System” menu will open up.
2. Navigate to the option “A/V settings…” and press the
OK-Button.
11.3 Network
If no OSD menu is visible on your screen, press the Menu-Button
to open the main OSD menu. Navigate to the option “Setup” and
press the OK-Button to select.
1. Navigate to the option “System” and press the OK-Button.
• The “System” menu will open up.
2. Navigate to the option “Network…” and press the OK-Button.
25