Need help?Do you have a question about the GOLDONI 30HST and is the answer not in the manual?
Essential safety guidelines for operating the tractor and its equipment to prevent accidents.
Guidance on using the safety frame and belts correctly to ensure operator safety during operation and transport.
Provides noise level data for tractors with and without a cab, adhering to regulatory standards.
Overview of the tractor's dashboard layout, instruments, controls, and warning lights.
Detailed identification and function of various control levers, pedals, and switches for tractor operation.
Details on locating and understanding the tractor's model, series, and chassis number.
Operating the tractor's lighting system and ignition switch for starting and stopping the engine.
Procedures for stopping the engine and understanding the dashboard display functions.
Guidance on selecting speed ranges, accelerating, and operating the tractor for forward and reverse movement.
Detailed steps for stopping the tractor, including releasing pedals, setting throttle, and engaging the parking brake.
Usage of the differential lock and operation of the rear Power Take-Off (PTO).
Introduction to hydraulic lift functions, covering controlled position, draft control, and front lift.
Operating the hydraulic lift for floating action, controlled position, and sensitivity adjustments.
Using controlled draft and combined position/draft modes for precise implement control.
Securing the hydraulic lift during transport and a summary of key control functions.
Instructions for operating the front hydraulic lift, including single and double-acting systems.
Procedure for moving the tractor when the engine is not running.
Guidance on the correct use and maintenance of the safety frame to ensure structural integrity.
Instructions for wearing safety belts to reduce accident risk, especially during tractor tipping.
Procedures for engine maintenance and regular greasing of key tractor components.
Details on checking and changing oil for various systems, including hydraulic lift, transmission, and brake fluid, plus filter cleaning.
Instructions for cleaning the tractor's radiator and transmission heat exchanger for optimal cooling performance.
Procedure for cleaning and replacing the air filter to ensure engine efficiency.
Information on adjusting the tractor seat for distance and firmness, including EEC approved seat features.
Table of recommended tyre inflation pressures for front and rear wheels in Bar and KPa.
Procedures for adjusting the brake link rod and registering the tractor's parking brake.
Guidance on the tractor's electrical system, including battery maintenance, fuse identification, and wiring diagrams.
Explanation of the numbering and symbols used in the tractor's electrical wiring diagram.
Specifications for Agip Supertractor Universal SAE 15W/40 oil, including viscosity and flash point.
Specifications for Agip Oso series oils, detailing viscosity, index, flash point, and pour point.
Specifications for Agip Rotra MP SAE 80W/90 and 85W/140 oils, covering viscosity and other key properties.
Specifications for DOT 4 brake fluid and Agip GR LP 2 grease, including their properties and applications.
To Next Page
General