MS400
Translation of the original operating instruction and spare parts list
- 4-
5007045-00
BA-E
®
EC-DECLARATION OF CONFORMITY
Manufacturer
GÖLZ
®
GmbH
Dommersbach 51, D-53940 Hellenthal
Tel.: (02482) 12 200 / Fax: (02482) 12 222
Declare hereby certifies on its sole responsibility that the following product:
MS 400
Masonry bench saw
Serial number:____________________
which is explicitly referred to by this declaration meet the following directives:
2006/42/EG Safety and health requirement
2004/108/EG Electromagnetic compatibility
2006/95/EG Low Voltage Directive
meet the following standards:
EN 12418
Documented evidence conforming to the requirements of the directives is kept available for inspection
at the above manufacturer’s address.
Hellenthal, den 06.05.2014 …………………………………………
To Next Page
Loading...