GÖLZ MS 400 User Manual

MS400
Translation of the original operating instruction and spare parts list
- 5-
5007045-00
BA-E
®
Contents
Preface ....................................................................................................................... 7
Warning signs and symbols .................................................................................... 7
1. Technical data and accessory ...................................................................... 8
1.1 Technical data of the machine...................................................................... 8
1.2 Provided accessory ...................................................................................... 8
1.3 Optional accessory ....................................................................................... 8
2. Description ..................................................................................................... 9
2.1 Main parts .................................................................................................... 9
3. Basic safety instructions ............................................................................ 10
3.1 Intended use............................................................................................... 10
3.2 Operating range ......................................................................................... 10
3.3 Organisational measures ........................................................................... 11
3.4 Selection and qualification of person .......................................................... 12
3.5 Safety instructions governing specific operational phases ......................... 12
3.6 Special work related to the maintenance and repair of the machine .......... 13
3.7 Information about special risks with electrical energy ................................. 13
3.8 Gas, dust, steam, smoke ............................................................................ 14
3.9 Noise .......................................................................................................... 14
3.10 Illumination ................................................................................................. 15
3.11 Oils, greases and other chemical substances ............................................ 15
3.12 Transport .................................................................................................... 15
3.13 Store ........................................................................................................... 16
4. Bringing into service ................................................................................... 17
4.1 Export checking .......................................................................................... 17
4.2 Assembling ................................................................................................. 17
4.3 Engine ........................................................................................................ 18
4.4 Setting up the machine ............................................................................... 18
4.5 Mounting / changing the blade ................................................................... 18
4.6 Electrical connections ................................................................................. 20
5. Operation ...................................................................................................... 21
5.1 Before starting the machine ....................................................................... 21
5.2 Starting the machine .................................................................................. 21
5.3 Cutting operation ........................................................................................ 21
5.3.1 Cutting method: Fixed depth cutting ............................................................................ 22
5.3.2 Cutting method: Free depth cutting for multiple steps cutting ..................................... 24
5.3.3 Cutting method: 45° bevel cuts ................................................................................... 26
5.4 Stop cutting operation ................................................................................ 29
5.5 Changing the blade .................................................................................... 29

GÖLZ MS 400 Specifications

General

Brand	GÖLZ
Model	MS 400
Category	Saw
Language	English