MS400
Translation of the original operating instruction and spare parts list
- 29-
5007045-00
BA-E
®
• Make sure the blade is not touching the table at any position
of the table when the cutting head is at the lowest position.
5.4 Stop cutting operation
To stop the machine, press the red button or directly the emergency switch to stop the machine.
The motor and the water pump shut off.
Carry out the maintenance and care work according to the chapter "maintenance and care".
5.5 Changing the blade
The blade must be changed if:
• the diamond segments of the blade are completely worn
• the material to be cut changes
• the blade turns irregularly
• the diamond segments are damaged or broken
For fitting a new blade, proceed as described in the chapter "Mounting / changing the blade".
To Next Page
Loading...