20 21
2.2 Required Tools
Tool Figure
Screwdriver
Phillips screwdriver
Second person
Ta b . 1 5 : Required Tools
3 Intended Use
Thisproductismadeformountingatscreenswithspecicscreensizes,
weightsandmountingpoints,whicharesummarizedinchapter“Specications“,
on a horizontal work surfaces. Another use than described in chapter “Descripti-
on and Function“ is not permitted. Neglecting and ignoring these regulations
and safety instructions can cause serious accidents, personal injury and
material damage. Also refer to chapter “Warranty and Liability“.
3.1 Use restrictions
Only use in dry interior rooms.
4 Installing
4.1 Preparing
Checking the completeness and integrity
>> Check the packing content by comparing it to the scope of delivery
regarding completeness and integrity.
Ensuring compatibility
Risk of material damage by improper
product combination
>> Thespecicationsofallusedproductsmust
matchorbewithinthespeciedrange.
Ta b . 1 6 : Ensuring compatibility
4.2 Desk Mounting
Risk of injury due to inappropriate
ambient conditions
>> Do not install the product to places with
direct sunlight or bright light. This contri-
butes to eye fatigue.
Risk of material damage by inappropri-
ate ambient conditions
>>
>>
>>
Keep enough space around product and
to the whole system to ensure proper
ventilation and mobility.
Mountonlytosufcientlythickandstable
surfaces.
Protect against pressure points.
Tab . 17: Wall mounting
Phillips screwdriver
1. Check the strength and stability of the
surface before installing and do not
damage them.
(Model 63497 only:
C 2. Assemble the cable guide (C).)
3. Choose a suitable mounting place.
Fi g . 12 : Desk Mounting
4. Fix the pole assembly (A) by tighte-
ning clockwise.
Fi g. 13: Fixing the pole assembly
63496+63497_manual_V4.indd 20-21 28.05.2018 16:02:47