To Next PageTo Next Page
Need help?Do you have a question about the Goodman TSTATG4272 and is the answer not in the manual?
General| Backlight | Yes |
|---|---|
| Hold Function | Yes |
| Fan Control | Auto / On |
| Mounting | Wall Mount |
| Programmability | 7-day programmable |
| Power Source | 24 VAC |
| Display | LCD |
| Temperature Range | 40°F to 99°F |
Details the thermostat's backlit LCD screen, front panel controls, and hidden buttons.
Explains the meaning of key indicators numbered 1 through 6 on the thermostat display.
Explains the meaning of key indicators numbered 7 through 10 on the thermostat display.
Explains the meaning of key indicators numbered 12 through 15 on the thermostat display.
Instructions for navigating setup, setting clock/day, and choosing operational modes.
How to adjust temperatures, use the fan button, and view outdoor sensor data.
Step-by-step guide for safely removing an old thermostat and preparing for installation.
Chart comparing old terminal markings to new connector markings and backplate terminals.
Diagram and list of terminals on the TSTATG4272 thermostat backplate for wiring.
Details the function and settings for jumpers located on the back of the thermostat.
Illustrates wiring configurations for conventional heating and cooling systems.
Illustrates wiring configurations for various heat pump systems.
Shows wiring diagrams for dry contact and remote/outdoor sensors.
Guide to using the diagnostic feature for testing thermostat outputs and equipment.
How to adjust backlight brightness, on/off behavior, and display language.
How to configure text scrolling and remove icons from the thermostat display.
How to use vacation mode, emergency heat, and set up accessories.
How to monitor and set alerts for filter and UV lamp usage.
How to set daily time periods, start times, and temperature setpoints for programming.
Configuring the thermostat's programming type and available operational modes.
Setting restrictions for setpoints and HVAC unit cycles per hour.
Configuring minimum compressor off minutes, setpoint difference, and stages.
Setting deadbands for each stage and delays between stage activations.
Configuring fan schedules, sensor inputs, delays, and temperature units.
Setting up comfort recovery, dry contact functions, and fault signal handling.
Procedure to restore thermostat settings to their original factory default values.
Disabling or enabling the thermostat's front panel buttons for security.
Accessing system information, testing outputs, and calibrating sensors.
Table listing setup steps, descriptions, page numbers, and factory default values.
Table listing further setup steps, descriptions, page numbers, and factory default values.
Diagnosing and resolving common problems with heating, cooling, and system operation.
Alphabetical reference to topics from A through D with corresponding page numbers.
Alphabetical reference to topics from E through P with corresponding page numbers.
Alphabetical reference to topics from R through W with corresponding page numbers.
Details the terms, conditions, limitations, and exclusions of the product's warranty.
