Page 19
Select Day of Week to program - Press the UP or DOWN buttons to choose the day
of the week to be programmed. Press Mode to advance to the next step.
Select Morning Start Time - Press the UP or DOWN buttons to adjust the time of day
desired. Press MODE to advance to the next step.
Programming a Daily Schedule
Select Morning Cool Setpoint - Press the UP or DOWN buttons to adjust the cool
setpoint desired. Press MODE to advance to the next step.
Select Morning Heat Setpoint - Press the UP or DOWN buttons to adjust the heat
setpoint desired. Press MODE to advance to the next step.
This thermostat features four programmable time periods per 24 hour day:
Morning, Day, Evening, and Night. The start time for each time period is
adjustable. The stop time for each time period is the start time for the next.
Repeat Start Time and Setpoint programming for Day, Evening, and Night.
Copy Current Day to Next - Press the UP button to Copy the current day’s program
to another day. Press the UP or DOWN buttons to choose which day to copy to.
Press MODE to confirm. Continue to press MODE to copy to more
days. Press the DOWN button to program another day with a different schedule.
Program Another Day - Press the DOWN button to choose to program another day
with a different schedule. Press MODE. Press the UP or DOWN buttons to choose
the desired day. Press MODE to advance to the next step.
Press the PROGRAM Button to exit Time Period Programming
To enter Time Period Programming
screens, Press and hold PROGRAM
until the scrolling prompt appears.
SET PROGRA M
User Setup:
Time Period Programming
OFF - Time Period Program is off.
RUN - Time Period Program is running.
HOLD TO SET - Press and hold
PROGRAM to make Time Period
Programming changes.
OFF
RUN
HOLD TO SET
To Next Page
Loading...
