3.2 Pairing With a Bluetooth Device
Press the On/Off button for three seconds until you hear ‘Bluetooth mode,
Pairing’. The blue LED indicator will quickly flash.
The cylinder speaker will attempt to automatically connect to the last device it
was paired with when Bluetooth mode is turned on. If you want to pair it with a
new device, please turn off your last Bluetooth device and then use your new
device to search and select the paring name.
Once you have paired the cylinder speaker with a smartphone, the cylinder
speaker will remember this device and will pair automatically when the device’s
Bluetooth is activated and in range. You do not need to re-pair any previously
connected devices.
Using your Bluetooth phone or tablet, turn on Bluetooth and search for
Bluetooth Devices.
Enable Bluetooth on your smartphone and search for available Bluetooth
connections, Select “GOODMANS FABRIC” from the list of devices. If you are
asked for a pass code enter “0000”.
When successfully paired, the LED indicator will slowly flash and you will
hear “Connected”.
To Next Page
Loading...
