Note: When the Line-In cable is connected to the High Power Bass
Party Speaker, your Bluetooth device will automatically be
disconnected.
5. Once you have paired the High Power Bass Party Speaker with a
Smartphone, it will remember this device and will pair automatically
when the device’s Bluetooth is activate and in range, you do not
need to re-pair any previously connected devices.
6. The High Power Bass Party Speaker will attempt to automatically
connect to the last device it was paired with if Bluetooth mode is
turned on. If you want to pair it with a new device, long press the
MODE button and your will hear "disconnected". Use your new use
your new device to search and select the pairing name.
1. If your device doesn’t have Bluetooth, you can use the Line in
connection.
2. Connect the 3.5mm Line in cable to the High Power Bass Party
Speaker, you will hear “Line in mode” and then connect the other end
to your device.
3. Select the music on your device to control and playback.
3.4 Using the LINE IN Connection
When your smartphone or tablet is paired to the High Power Bass Party
Speaker, use your music App to playback your music.
3.3 Playing Your Music
ON OFF DC-IN USB MIC INLINE IN
To Next Page
Loading...
