Goodwe ET Series Quick Installation Guide

4
LED Indicators
Indicator Status Explanation
The inverter is power on and in the standby mode.
The inverter is starting up and in the self-check mode.
The inverter is in normal operation under grid-tied or o-
grid modes.
BACK-UP output overload.
A fault has occurred.
The inverter is powered o.
The grid is abnormal and the inverter is in o-grid mode.
The grid is normal and the inverter is in grid-tied mode.
BACK-UP is o.
The monitoring module of the inverter is resetting.
The inverter fails to connect with the communication
terminal device.
Faults between the communication terminal device and
Server.
The monitoring of the inverter operates well.
The monitoring module of the inverter has not been
started yet.

Goodwe ET Series Specifications

General

Type	Hybrid Inverter
Number of MPPTs	2
THDi	<3%
Nominal AC Voltage	230V
AC Voltage Range	180V to 280V
Operating Temperature Range	-25°C to 60°C
Communication Interfaces	RS485, WiFi