EasyManua.ls Logo

Goodwe GW10K-SDT-20 - Safety Precautions; General Disclaimer; Safety Disclaimer

Goodwe GW10K-SDT-20
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
01
01 Safety Precautions
General Disclaimer
• Theinformationinthisquickinstallationguideissubjecttochangeduetoproductupdates
orotherreasons.Thisguidecannotreplacetheproductlabelsorthesafetyprecautionsinthe
usermanualunlessotherwisespeci󽗉ed.Alldescriptionshereareforguidanceonly.
• Beforeinstallations,readthroughthequickinstallationguideandtheusermanualtolearn
abouttheproductandtheprecautions.
• Allinstallationsshouldbeperformedbyprofessionalandknowledgeabletechnicianswhoare
familiarwithlocalstandardsandsafetyregulations.
• Checkthedeliverablesforcorrectmodel,completecontents,andintactappearance.Contact
theafter-salesservicecenterifanydamageisfoundoranycomponentismissing.
• Useinsulatingtoolsandwearpersonalprotectiveequipmentwhenoperatingtheequipment
toensurepersonalsafety.Wearanti-staticgloves,clothes,andwriststripwhentouching
electrondevicestoprotecttheinverterfromdamage.
• Strictlyfollowtheinstallation,operation,andcon󽗉gurationinstructionsinthisguideanduser
manual.Themanufacturershallnotbeliableforequipmentdamageorpersonalinjuryifyou
donotfollowtheinstructions.Formorewarrantydetails,pleasevisithttp://www.goodwe.com.
DC Side
1. Ensurethecomponentframesandthebracketsystemaresecurelygrounded.
2. ConnecttheDCcablesusingthedeliveredDCconnectorsandterminals.Themanufacturer
shallnotbeliablefortheequipmentdamageifotherconnectorsorterminalsareused.
3. EnsuretheDCcablesareconnectedtightlyandsecurely.
4. MeasuretheDCcableusingthemultimetertoavoidreversepolarityconnection.Also,the
voltageshouldbeunderthepermissiblerange.
AC Side
1. Thevoltageandfrequencyattheconnectingpointshouldmeettheon-gridrequirements.
2. AnadditionalprotectivedevicelikethecircuitbreakerorfuseisrecommendedontheAC
side.Speci󽗉cationoftheprotectivedeviceshouldbeatleast1.25timestheACoutput
ratedcurrent.
3. PEcableoftheinvertermustbeconnected󽗉rmly.Theresistancebetweentheneutralwire
andtheearthcableislessthan10Ω.
4. YouarerecommendedtousecoppercablesasACoutputcables.Contactthe
manufacturerifyouwanttousealuminumcables.
Inverter Side
1. Terminalsatthebottomoftheinvertercannotbearmuchload.Otherwise,theterminals
willbedamaged.
2. Alllabelsandwarningmarksshouldbeclearaftertheinstallation.Donotscrawl,damage,
orcoveranylabelonthedevice.
3. Warninglabelsontheinverterareasfollows.
Safety Disclaimer
Warning

Other manuals for Goodwe GW10K-SDT-20

Related product manuals