47
User Manual V1.6-2022-01-05 Appendix
Protection category denition
Moisture location category denition
Environment category denition
Other Tests
For Australian requirements, in the THDi test, Zref should be added between the inverter and
mains.
RA, XA for the line conductor
RN, XN for the neutral conductor
Zref:
RA = 0, 24, XA = j0,15 at 50Hz
RN = 0, 16, XN = j0,10 at 50Hz
Appendix
Moisture Parameters
Level
3K3 4K3 4K4H
Temperature Range 0~+40°C -33~+40°C ~20~+55°C
Moisture Parameters 5%~85% 15%~100% 4%~100%
Environment Condition Ambient Temperature Relative Humidity Applied to
Outdoor -20~50°C 4%~100% PD3
Indoor Unconditioned -20~50°C 5%~95% PD3
Indoor conditioned 0~40°C 5%~85% PD2
To Next Page
Loading...
