© copy right reserved by GoodWe
◆ Reconnecting
Error Code: Null
Cause: Inverter keep checking
Measurement:
A. If condition happens at dawn or dusk, please ignore the problem, as the voltage is too low
to keep the inverter constantly running;
B. Check the AC wiring, especially for the line N, PE must be wired correctly;
C. Check if the regulation is correct;
D. Check if any fault display when inverter keep checking;
E. Check the counting down time remains when the inverter reconnect, and feed back to
GoodWe local service center.
2.4 Trouble Shooting
To Next Page
Loading...
