EasyManua.ls Logo

Goodwe SDT G2 Series - Check before Power on

Goodwe SDT G2 Series
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
02
No. Check Item
1
Theinverteris󽗉rmlyinstalledatacleanplacewhereiswell-ventilatedandeasy-
to-operate.
2
ThePEcable,DCinputcable,ACoutputcable,andcommunicationcableare
connectedcorrectlyandsecurely.
3 Cabletiesareroutedproperlyandevenly,andnoburrs.
4 Unusedportsandterminalsaresealed.
5 Thevoltageandfrequencyattheconnectionpointmeettheon-gridrequirements.
Check Before Power ON
HighVoltageHazard.Power
o󽗈theinverter󽗉rstbeforeany
operations.
Potentialrisksexist.Wear
properPPEbeforeany
operations.
Readthroughtheguidebefore
anyoperations.
Delayeddischarge.Waituntil
thecomponentsaretotally
dischargedafterpowero󽗈.
High-temperaturehazard.Do
nottouchtheequipmentto
avoidbeingburnt.
N/A N/A
5min

Other manuals for Goodwe SDT G2 Series

Related product manuals