EasyManua.ls Logo

Goodwe SBP Series - User Manual

Goodwe SBP Series
39 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User Manual
AC-Coupled Inverter
SBP Series
V1.5-2021-01-21

Table of Contents

Questions and Answers

  • N
    Nicole HendrixAug 26, 2025
    Why Goodwe SBP Inverter battery does not charge?
    • R
      Richard JohnsonAug 26, 2025
      The battery may fail to charge due to: 1. Smart Meter communication failing or CT connected in a wrong direction, which gives S-BP wrong data. To fix this, make sure BMS communication is OK on PV Master (for lithium batteries). 2. The battery not being in the condition for charging, such as high SOC, battery communication failing for lithium batteries, etc. Check if CT is connected in the right position and in the right direction as stated in the user.
  • C
    cparrishNov 9, 2025
    What to do if Goodwe SBP Inverter S-BP doesn't discharge or output to support loads?
    • J
      Jesus ParkerNov 9, 2025
      Several factors can prevent the S-BP from discharging or providing output to support loads: 1. If a grid-tied inverter is connected and its output exceeds the power, ensure the communication between the S-BP and SmartMeter is working correctly. 2. If the load is connected between the grid and CT, the system might not detect the load power. Make sure the load power exceeds 150W. 3. The battery discharges only when the load power is higher than 150W. If the load power is lower than 150W, the battery will not discharge continuously. If the meter power is higher than 150W, verify the SmartMeter and CT connection and direction. 4. If Smart Meter communication fails or the CT is connected incorrectly, giving the S-BP wrong data, ensure the SOC is higher than I-DOD. If the battery discharges...

Goodwe SBP Series Specifications

General IconGeneral
BrandGoodwe
ModelSBP Series
CategoryInverter
LanguageEnglish

Related product manuals