Gooxi ASR4110G-D04R-G2 - Page 9

8
No.
Indicator light /button
No.
Indicator light /button
1
Power switch
button/indicator
4
System Alarm Indicator
2
Restart button
5
Network port 1 connection
status indicator
3
Hard drive indicator
6
Network port 2 connection
status indicator
LED status description
logo
Indicator light
/button
status description
power indicator
Description of the power indicator light:
Green (steady on): Indicates that the device has
been powered on normally.
Green (blinking): Indicates that the device is in
standby.
Green off: Indicates that the device is not powered
on.
Power button description:
Press the button briefly in the power-on state to
turn off the OS normally.
Press and hold the button for 6 seconds in the power
-on state to force the server to Power off.
Short pressing this button while the system is in
standby mode will power on the device.
Restart button
Press to restart the server
Hard drive
indicator
Blinking green light: The hard drive is operating
normally
System warning
indicator
System warning indicator. Including system
alarms, fan alarms, power supply alarms, etc.,
which can be viewed through the IPMI
management software.
Ne t w o r k po r t
con n ec t i on
st a t u s
indicator
The Ethernet port indicator lights correspond to
the network card slots.
Green (steady on): indicates that the network
port is connected normally.
Off : indicates that the network port is not in use or
faulty.
Note: associated with the two 1GE ports on the
motherboard.
Ne t w o r k po r t
con n ec t i on
st a t u s
indicator
The Ethernet port indicator lights correspond to
the network card slots.
Green (steady on): indicates that the network
port is connected normally.
Off : indicates that the network port is not in use or
faulty.
Note: associated with the two 1GE ports on the
motherboard.
Table 2-2