7
Connecting Wi-Fi Remote to several cameras
You can connect the remote with up to 50 cameras to operate them all simultaneously with a button.
Follow this steps:
2 - In every camera press Wi-Fi button twice to enter Wi-Fi menu directly, press SHUTTER and:
Select WIFI RC → Select NEW
2 - In the remote press and hold SHUTTER and at the same time press POWER . The remote enters
Searching Mode.
3 - Once finished, the remote remains in Searching Mode. To stop it press SHUTTER button.
4 - Like with a single camera (see previous card) the remote can simultaneously:
- Turn On/Off all cameras (POWER button)
- Activate Recording in all cameras (SHUTTER button)
- Change operation mode in all cameras (POWER button)
NOTE: the remote can not access the cameras menus and change settings. This must be done in
every camera individually.
All cameras start searching the closest remote.
1 - Turn On all cameras to be connected
In a few seconds all cameras will connect to the remote
To Next Page
Loading...
