GoPro Hero3 - Page 43

43
SET UP
ONE BUTTON MODE (continued)
To exit One Button mode:
1. Power camera ON.
2. Press and hold
until shows in the LCD window.
3. Press
to enter.
4. Use
to highlight OFF.
5. Press
to select.
6. To exit, hold down
for two seconds or cycle through to and
press
.
PRO
TIP:
To stop the capture process (VIDEO or TIME LAPSE) when in
ONE BUTTON, press and hold
for two seconds. You will
return to the ONE BUTTON menu where you can turn
ONE BUTTON mode OFF.
Note: One Button mode is disabled when connected to Wi-Fi Remote or GoPro App.