GoRave AR5 - Playing audio from a MacOS computer (USB Audio Sender); Playing audio from a Windows computer (USB Audio Sender); Add an Audio Sender to the Favorites List

GORAVE AR5 AUDIO RECEIVER
Owner’s Installation and Operation Manual
V1.4 / 12-16-2014
8
At this point, the device is transmitting audio via the Audio Sender.
d) If the Audio Sender is the only one transmitting and it has been added to your AR5 Audio Receiver’s Favor-
ites List, then you will hear your audio play from your GoRave loudspeakers.
e) If the Audio Sender has not been favorited, follow the instructions in Section 3.6 to add your Sender to the
Receiver’s Favorites List.
f) If the Audio Sender is not the only one transmitting and your AR5 is playing audio from another source, fol-
low the instructions in Section 3.8 to hear audio from a different Audio Sender.
g) The GoRave app will list the AR5 Audio Receivers the device has connected to. In the app, you can control
the volume of each AR5 as well as Master Volume up/down.
3.4 Playing audio from a MacOS computer (USB Audio Sender)
a) Insert the USB Audio Sender into the Mac’s USB port.
b) Play some audio on the device.
c) Click the Apple in the top left corner of the screen and choose “System Preferences”.
d) Click on “Sound”.
e) In the Sound settings screen, click the “Output” tab.
f) Select “SKAA Transmitter” from the list of audio output devices.
g) Adjust the volume to desired level.
h) Play an audio le on your Mac and follow the Favorite List process in Section 3.6 to add this USB Audio
Sender to the Audio Receiver’s Favorites List.
i) After you add the USB Audio Sender to the Favorites List, press the Connect button four times to return the
AR5 into “All Play” mode.
3.5 Playing audio from a Windows computer (USB Audio Sender)
a) Insert the USB Audio Sender into the Windows device. It will automatically install the required drivers and
enable wireless audio transmission.
b) Play some audio on the device.
c) Adjust the volume on the device to desired level.
d) Follow Section 3.6 to add this USB Audio Sender to the Audio Receiver’s Favorites List.
e) After you add the USB Audio Sender to the Favorites List, press the Connect button four times to return the
AR5 into “All Play” mode.
Go to http://gorave.com/support and select the “Audio Sender” guide for a quick video tutorial on this topic.
3.6 Add an Audio Sender to the Favorites List
AR5 Audio Receivers can save a list of favorite Audio Senders. If an Audio Sender is not on the favorites list,
the AR5 may not play your audio. Go to http://gorave.com/support and select the “Audio Sender Favorites List”
guide for a quick video tutorial on this topic.
a) To add your Audio Sender to the Favorites List of a particular AR5, connect the Audio Sender to a device
and start playing audio.