GoRave AR5 - “All Play” mode; Select a different Audio Sender when another is already playing; Wired Input Connection

GORAVE AR5 AUDIO RECEIVER
Owner’s Installation and Operation Manual
V1.4 / 12-16-2014
9
b) The LED status indicator on the AR5 should be a dim amber or dim green to indicate that it is exploring for
new Audio Senders. Double click the Connect button on the AR5 to search for the transmitting, non-favorite
Audio Sender. The LED indicator will ash bright amber when it discovers the Audio Sender signal.
c) When you hear your audio playing from your loudspeakers, press and hold the Connect button for four
seconds to save your Audio Sender in the Favorites List.
d) The LED status indicator will turn solid green to indicate audio is playing from a favorite Audio Sender.
e) After you add the USB Audio Sender to the Favorites List, press the Connect button four times to return the
AR5 into “All Play” mode.
3.7 “All Play” mode
“All Play” mode is the easiest way to use GoRave when you have more than one Audio Sender in your space.
After you add or remove an Audio Sender from an AR5’s Favorites List, press the Connect button four times to
put that AR5 in “All Play” mode. The LED status indicator will turn red. Now the AR5 will automatically play from
any transmitting Audio Sender in its Favorites List without having to manually press the Connect button.
Play with one Audio Sender at a time for AR5 receivers in “All Play” mode. Disconnect the rst Audio Sender
when you want an AR5 to detect and play audio from a second Audio Sender.
3.8 Select a different Audio Sender when another is already playing
a) The easiest way to change audio sources is to disconnect the Audio Sender from the rst device, then con-
nect and play from a second.
b) Activate “All Play” mode so the AR5 will automatically play from any transmitting Audio Sender in the favor-
ites list.
c) To manually control audio playback from the AR5:
(i) single click the Connect button to switch to the next transmitting favorite Audio Sender
or
(ii) double click on the Connect button to switch to the next transmitting non-favorite Audio Sender.
3.9 Wired Input Connection
Your GoRave AR5 Audio Receiver has one auxiliary connection from an external audio device. Go to
http://gorave.com/support and select the “Wired Connection” guide for a quick video tutorial on this topic.
You can connect your home stereo, CD player, Apple Airport Express, Blackberry Gateway, Xbox, etc. Play-
back from a source connected to the AR5 via the wired auxiliary input will take priority over input from wireless
Audio Receivers.
Connect the Auxiliary Audio Input to a GoRave HCRCA2W RCA wall connection plate using 4-conductor
speaker wire. Use cable as suggested in section 4.2 of this manual. Connect the left channel to the white jack
and the right channel to the red jack on the RCA wall plate.
To connect to your external device use a HC35RCA2 cable (male 3.5mm to male stereo RCA) or a common