EasyManua.ls Logo

Gorenje Classico BO73CLI - Setting the Minute Minder; Displaying the Setting; Deleting a Setting

Gorenje Classico BO73CLI
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
425514
and confi rm it by pressing the (A) knob. The symbol for
the end of operation will start to fl ash (2).
Set the stop time: Rotate the (A) knob to set the stop
time and confi rm it by pressing the (A) knob.
The clock hands will turn to clock display. Symbols (1)
and (2) will be lit up.
The timer will wait for the start of the cooking process.
Set the oven – use the oven knobs to set the operating
mode and temperature.
The oven will start to operate at the start time, and stop
operating at the stop time.
When the clock reaches the selected stop time, the
oven will be switched o , which will also be indicated by
an intermittent acoustic signal. The acoustic signal can
be switched o by pressing the (A) knob; otherwise, it
will switch o automatically after 1 minute. The symbol
(2) will fl ash. To continue cooking, press the (A) knob
and hold it for 2 seconds, and set a new cooking time if
necessary.
The clock can also be used as a minute minder which will
sound an alarm upon expiry of a set amount of time.
The minute minder can only be selected when the
program timer is not programmed or in use.
Select the (3) symbol by consecutively pressing the (A)
knob until the symbol starts to fl ash.
Rotate the (A) knob to set the time when you wish the
minute minder to sound the alarm. The longest possible
setting is 3 hours.
• Confi rm the setting by pressing the (A) knob again.
Clock hands will automatically turn to lock display and
the symbol (3) will be lit up.
When the time you set runs out, an intermittent acoustic
signal will be sounded. The acoustic signal can be
switched o by pressing the (A) knob and holding it
for 2 seconds; otherwise, it will switch o automatically
after 1 minute.
Whenever a timer function is set, you may check it by
pressing the (A) knob. The clock hands will briefl y move to
the set value and then return to display the current time.
Delete the setting by pressing the (A) knob and holding it
for 2 seconds. The symbol of the deleted function will be
switched o .
Setting the minute
minder
Displaying the setting
Deleting a setting
12

Related product manuals