Gorilla Playsets Landing - Step 6: Deck Supports

Step 6: Deck Supports
1: Attach one Deck Support (offset holes down) to the inside of the Front and Rear
Corner Posts with two 5/16” x 4-1/2” hex bolts and 5/16” washers.
Note: One Panel Support Board was removed for clarity.
2 x 4 x 47-3/8”
Deck Support
(offset holes down)
Note:
Panel Support Board
removed for clarity.
5/16” x 4-1/2”
Hex Bolt
5/16” Washer
Page 35
®