Gorilla Playsets Landing - Page 61

Step 32: Swing Leg Cross-Member
1: Position the 2 x 4 x 58” Swing Leg Cross-Member against the Swing Legs.
2: Level the Swing Leg Cross-Member, and secure to the Swing Legs with 3/8” x 3-1/2”
lag screws and 3/8” washers.
3/8” x 3-1/2”
Lag Screw
3/8” Washer
2 x 4 x 58”
Swing Leg
Cross-Member
Page 61
®