Step 37: Sun Support and Sun
1: Place a 2 x 4 x 43-3/4” Sun Support underneath the Roof Supports. Make sure the
Sun Support is level. Attach the Sun Support through the pre-drilled holes in the bottom
to the Roof Supports with two 2-1/2” wood screws. Repeat for the other side of the roof.
2: Place a 2 x 6 x 16” Sun centered on top of the Sun Support. The face of the Sun
should be ush with the face of the Sun Support. Fasten the Sun to the Sun Support
with two 3” wood screws. Repeat for the other side of the roof.
2 x 6 x 16”
Sun
2 x 4 x 43-3/4”
Sun Support
2-1/2”
Wood Screw
3”
Wood Screw
Page 66
To Next Page
Loading...
